Integra DTR-30.2, Инструкция по эксплуатации

Страница: 30 / 84

30
En
Area 5: Put the antenna outside and point it straight up .
The antenna cannot be used indoors.
Setting the Satellite Radio Mode
Before you can listen to SIRIUS Satellite Radio, you must
set the “
SAT Radio Mode ” setting to “ SIRIUS ”.
Tip
• Alternatively, you can use the AV receiver’s Setup , arrow but-
tons, and Enter .
Selecting SIRIUS Satellite Radio
Tip
• Alternatively, you can use the AV receiver’s
Tuner
.
Signing Up for SIRIUS Satellite Radio
Before you can use SIRIUS Satellite Radio , you must
first sign up for an account. You’ll need a major credit
card and your
SIRIUS Satellite Radio ID, which you can
get from the AV receiver, as explained below, or from the
SiriusConnect Home tuner package.
Note
• Your ID is also displayed on the Satellite Radio screen. See
“Positioning the SiriusConnect Home Antenna” (
➔
33 ).
Selecting SIRIUS Satellite Radio Channels
There are three ways to select SIRIUS Satellite Radio
channels:
1.
Channel Search mode: select any channel.
2. Category Search mode: select channels by category.
3. Direct tuning: enter channel number.
■
Channel Search mode
1
Press Receiver followed by Setup .
The main menu appears onscreen.
2
Use q / w to select “7. Hardware Setup”, and then
press
Enter
.
The “ Hardware Setup ” menu appears.
3
Use q / w to select “3. Tuner”, and then press
Enter .
4
Use
q
/
w
to select “SAT Radio Mode”, and
e
/
r
to
select “SIRIUS”.
Pressing e / r cycles through the following options:
`
None :
Select if you’re not using Satellite Radio.
`
SIRIUS :
Select to use SIRIUS Satellite Radio.
Return
CH +/–
Receiver
Enter
qwer
Setup
Tuner
D.TUN
Display
Number
buttons
7. Hardware Setup
1. Remote ID
2. MultiZone
3. Tuner
4. HDMI
5. Network
7–3. Tuner
FM/AM Frequency Step
SAT Radio Mode
Antenna Aiming
SIRIUS Parental Lock 200kHz/10kHz
SIRIUS
5
When you’ve finished, press Setup .
Setup closes.
Press Receiver , and then press Tuner repeatedly
to select “SIRIUS”.
If “ CHECK SR TUNER ” appears on the display,
make sure the SiriusConnect receiver is connected
properly. If “
ANTENNA ERROR ” appears, make
sure the antenna is connected properly.
1
Use Tuning
q
/
w
on the AV receiver to select
channel 0.
Your SIRIUS Satellite Radio ID number is dis-
played. Write it below.
ID
2
To sign up, go to: http://activate.siriusradio.com
or call: 1-888-539-SIRIUS (7474)
1
Press
Tuner
, and then press
Enter
repeatedly to
select Channel Search mode.