Advanced Settings
35
Direct
Make the settings for Direct listening modes.
Setting Item
Default Value
Setting Details
Analog Subwoofer
Off
Set the output of low-frequency signals from the
subwoofer during playback in Direct listening
mode.
"Off": No output
"On": Output
r
The setting cannot be changed if "Speaker
Configuration" - "Subwoofer" is set to "No".
DSD DAC Direct
Off
Set processing of DSD (Super Audio CD) audio
signals performed by DSP when Direct listening
mode is selected.
"Off": DSD signals are processed by the DSP.
"On": DSD signals are not processed by the DSP.
4.Source Setup
Adjust the volume level difference among the multiple devices connected to this unit,
rename an input selector, or adjust the image quality. The setting can be separately set to
each input selector button. When you select a desired input to check the video or audio,
start playback of the connected device.
AccuEQ Room Calibration
Setting Item
Default Value
Setting Details
AccuEQ Room
Calibration
Off
Enable/disable the sound field set in automatic
speaker setup
"On": Enable this function
"Off": Disable this function
r
This setting cannot be changed in any of the
following cases.
– Automatic speaker setup is not performed.
– Headphones are connected.
IntelliVolume
Setting Item
Default Value
Setting Details
IntelliVolume
0 dB
Adjust the volume level difference between the
devices connected to the unit. Select a value
between "-12 dB" to "+12 dB".
Set a negative value (–) if the volume of the target
device is larger than the others and a positive
value (+) if smaller.
r
This function is not effective in Zone 2/Zone 3.
