Advanced Settings (Setup Menu)
En-40
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item
Default Value
Setting Details
Front Left
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Center
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Front Right
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Height Left
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
●
This cannot be selected if "Configuration" -
"Bi-Amp" is set to "Yes".
Height Right
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
●
This cannot be selected if "Configuration" -
"Bi-Amp" is set to "Yes".
Surround Right
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Back Right
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
●
This cannot be selected if "Configuration" -
"Bi-Amp" is set to "Yes".
Setting Item
Default Value
Setting Details
Back Left
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
●
This cannot be selected if "Configuration" -
"Bi-Amp" is set to "Yes".
Surround Left
0.0dB
Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Subwoofer
0.0dB
Select a value between "-15.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
●
The speaker "Level Calibration" may be unable to be changed depending on the settings in
"Configuration" - "Speaker Channels" / "Subwoofer".
●
"Level Calibration" cannot be changed while muting is on.
