15 |
P a g e
Ezeio v9 - 120317
Example 1:
Ezeio temperature input scaling for RTD’s and thermocouples.
Before proceeding any further, Click on ‘Save Changes’.
Select ‘Custom’ for 2300-RTD6 and 2300-Tc8 input configurations.
Type in these 2 calibration details for all temperature inputs.
The 2300 sends the exact temperature of the RTD’s and
thermocouple’s to the Eze Controller.
Chose a ‘Logging’ time for this input to be logged.
Note: Failure to select a Logging time will result in this input not
being logged.
In this case, the Ambient Temperature Probe is wired into the
2300-RTD6, input 1.
Click on ‘Status’ to see the flow meter reading.
