© Intatec Ltd 2014
7
Concealed Supply Cont.
The shower panel can be supplied by a concealed supply, through a wall or panel.
• Fit the blanking cap (10) to the top external supply connection.
• The concealed supply must terminate with a G½ parallel female thread.
• Insert the 8 l/m flow limiter (6) in the back entry leg (5) respecting the installation direction.
• Installer to apply 2 drops of a suitable Loctite thread sealant onto the smaller male thread,
which will lock the component in place.
• Fit the back entry leg (5), using a suitably sized spanner located on the two flats, onto
the concealed supply fitting using the fibre washer (8).
• Remove the shower head cover (2) from the shower panel.
• Carefully couple the shower panel onto the inlet connection fitting (5) and mark out precisely
the six fixing positions on the wall, ensuring the shower panel is vertical.
• Remove the shower panel and drill the wall and fit the 6 wall plugs.
• Permanently connect the supply to the shower using the filter washer (7).
• Using the screws (3) provided secure the shower panel to the wall.
www.divapor.com
