INSYS Modem 336 LL 2D/4D 5.x Originate / Answer, Руководство пользователя

Страница: 51 / 80

INSYS Modem 336 LL 2D/4D 5.x Originate / Answer AT Command Reference
16 AT Command Reference
Command Description
AT** Start of the flash load function
A/ Repeat the last command
The last command is repeated.
AT\A<n>
Select maximum MNP block size
Define maximum block size for error corrected MNP transmissions.
AT\A0
64 byte
AT\A1
128 byte (default)
AT\A2
192 byte
AT\A3
256 byte
AT\B<n> Send “break” to the other INSYS Modem 336 LL 2D/4D 5.x Originate / Answer
For connections that were not error corrected, the INSYS Modem 336 LL 2D/4D 5.x
Originate / Answer sends a break signal to the other INSYS Modem 336 LL 2D/4D 5.x
Originate / Answer. The length of the signal is: the specified parameter times 1/10 of a
second.
For error corrected connections, the INSYS Modem 336 LL 2D/4D 5.x Originate / Answer
sends a break signal according to the active error correction protocol without consider-
ing a parameter specification.
If no connection is established or if a fax connection is active, an error message is dis-
played.
AT\B1
1/10 second break signal
AT\B2
2/10 second break signal
AT\B3
3/10 second break signal
AT\B4
4/10 second break signal
AT\B5
5/10 second break signal
AT\B6
6/10 second break signal
AT\B7
7/10 second break signal
AT\B8
8/10 second break signal
AT\B9
9/10 second break signal
AT%B<n> Switch key abort on and off during connection
%B0 Key abort is active. Each character on the TX line will result in an
interruption of the connection setup.
%B1 Key abort is deactivated. A connection setup can not be interrupted
manually. A connection setup can only be terminated via DTR drop, in-
ternal canceling of the INSYS Modem 336 LL 2D/4D 5.x Originate / An-
swer (
NO DIALTONE, BUSY ) or Timeout ( NO CARRIER ). (S-Registry
36, Bit 6) (default)
51