INSYS GSM 4.2
INSYS GSM 4.2 compact
Functions and their Configuration
Sep-06
57
The INSYS GSM can then edit and delete all SMS messages with this password. The
application can edit and delete all other SMS messages.
2.
Select a query cycle of the application that is larger than the one of the INSYS GSM
(e.g. factor 2-3). Otherwise the INSYS GSM will re-trigger its query cycle every time
the application is queried (= activity at the RS232 interface).
Note
If the query cycle is triggered frequently, for example due to activity
at the RS232 interface, this may result in the INSYS GSM being no
longer able to start a query of the SMS input buffer.
Procedure
To activate automatic SMS processing in the software HSComm, set a check mark in the
check box "Automatic SMS processing" in the tab "Basic settings" in the group "GSM con-
nection".
Pertinent AT commands
AT**SMSRX
Automatic SMS reception processing
6.2.4
Commands via SMS
Most of the extended AT** commands as well as commands for switching the outputs
and querying the alarm inputs can be transferred via SMS to the INSYS GSM. Responses
can be sent back via SMS to a user-defined number.
Syntax for extended AT commands via SMS:
[<password>,]<command>[,CN: <reply>]
Meaning:
Parameters:
Password for remote configuration and
SMS query.
If no password is set, the separating
comma is dropped also.
<password>
Extended
AT**
command with parame-
ters
<command>
Optional phone number, to which the re-
sponse is sent via SMS. After "
CN
:" a space
character must be entered.
<reply>
Examples for switch outputs / alarm inputs:
[Password],
AT**OUT1=1[,CN: +491601498456]
The switch output 1 is switched to normally open.
