Notes
Regarding the Use of the Manual
INSYS Modem 336/56k 4.1 (UL)
3
Notes Regarding the Use of the Manual
¾
This manual uses the symbol
for especially important notes. Further notes
will be marked accordingly.
¾
All factory settings are marked “default”.
Example (Chap. 5.7.3): Enter old password (default: QWERTY)
¾
In Chapters 4 to 6 the description consists of two columns. Individual func-
tions are described on the left side. The according
AT
commands and the mo-
dem responses can be found in the right column.
Function description
AT
command
Example (Chap. 5.2.7):
After the hardware reset, load the user profile 1
ATZ1
¾
All
AT
commands start with the letters
AT
and end with a “Return” (Carriage
Return - CR).
AT
commands can be entered in capital or small letters. The
command is evaluated as soon as the modem received a return.
¾
In the following, the used syntax is explained:
c
ATDT AT
command (font: Courier, bold)
d
<
Term>
Input of a parameter (font: Courier, bold)
e
[
Term]
Input of an optional parameter (font: Courier, bold)
f
Term
Response from the modem (font: italic)
Examples:
c
ATDT<n>
Dialing the phone number
<n>
ATDT1234
Dialing the phone number
1234
d
+
e
AT+MS=<Modulation>,
[Automode]
Select modulation type
AT+MS=V92
Select modulation type
V.92
AT+MS=V92,1
Select modulation type
V.92 with automatic
adjustment
f
Connect
Connection to the remote terminal has been
established.
>
Input prompt during the remote configuration.
8
July 06
