6
Input & Output
Input:
Audio input of the filter.
•
The signal present at the
Input
will output from all filter types
simultaneously.
Limiter Toggle:
The
Limiter Toggle
sets a fixed level tanh[3] circuit.
Limiting is only applied to the signal present at the
Input
.
•
When the toggle is in the up position, limiting/waveshaping
is bypassed.
•
When the toggle is in the down position, limiting/waveshaping
is enabled.
Gain:
The
Gain
fader affects the signal present at the
Input
.
•
If the fader is in the up position, the signal present at the
Input
will be
at its full scale amplitude.
•
If the fader is in the down position, the signal present at the
Input
will
be fully attenuated.
•
If limiting is enabled, the centre position of the
Gain
fader is
optimised as a “sweet spot” for versatile general purpose use.
Inverting Input:
Inverting audio input of the filter.
•
The signal present at the
Inverting Input
is inverted and will output
from all filter types simultaneously.
•
The level of the signal present at the
Inverting Input
is inversely
proportional to the level of the
Q
parameter. As resonance
increases, the signal present at the
Inverting Input
decreases.
•
This functionality can be used for dynamic signal blending.
Low Pass Output:
Low pass filter output.
•
Any harmonics above the cutoff frequency are attenuated.
