21
•
Set the
Q
knob to its maximum position. This allows for the monitoring
of the
Inverting Input
.
•
For a more aggressive kick drum sound, enable feedback by setting
the
Feedback Toggle
to its up position and connect the
Low Pass
Output
of
I-ō47
to the input of
tanh[3]
. Monitor the output
of
tanh[3]
.
Control Path:
•
Connect a gate or trigger signal source to the gate/trig input of cèis.
•
Connect the attack gate output of cèis to the
Strike Input
.
•
Connect the CV output of cèis to a multiple.
•
Connect one copy of the cèis CV signal to the
FM Input
and set the
FM Attenuverter
just to the right of its centre position. This sets the
amount of pitch modulation for the kick drum sound.
•
Connect a second copy of the envelope generator CV signal to an
full scale inverter.
•
Connect the output of the inverter to the
Q CV Input
.
•
Set the shape knob of cèis to a logarithmic/exponential
response curve.
•
Set the attack and sustain faders of cèis to their minimum positions.
•
Set the decay and release faders of cèis to a short decay and
short release.