Instron 1000KPX-J3, Руководство по концепции системы

Страница: 31 / 58

31
Install covers for crosshead lock cylinders - J3-style crosshead
Product Support: www.instron.com
Install covers for crosshead lock cylinders - J3-style
crosshead
Warning
For frames that are equipped with hydraulic lock cylinders (J3-style crosshead), covers are provided that
mount to the ends of the crosshead and cover the lock cylinders. These covers are either removed for
shipment or during installation and must be installed on the frame once the frame is in place and ready
for operation. Mounting hardware is supplied. Slide the covers down over the ends of the crosshead from
the top. Secure in place with cap screws, refer to
Figure 13 .
When the frame is equipped with crosshead lock cylinders (J3-style crosshead), the
supplied covers MUST be installed over the cylinders. The bolts used in the lock cylinders
will become projectiles if any should break. Severe personal injury could result if the covers
are not in place!
Figure 13. Installing lock cylinder covers on frames with a J3-style crosshead.
2000KPX-J3 Frames All Frames Except 2000KPX-J3 Frames