INSTEON LampLinc Dimmer User’s Guide
Page 20 of 21
SPECIFICATIONS
LampLinc Dimmer Specifications
General
Smarthome Product Number
2456D2, INSTEON LampLinc Lamp Dimmer, 2-prong
2456D3, INSTEON LampLinc Lamp Dimmer, 3-prong
Warranty 2
years
Operation
Status LED
White
On-Levels 32
Ramp Rate
(full-ON to full-OFF)
0.125 to 9 seconds if programmed locally,
0.125 seconds to 9 minutes if programmed remotely
Local Control
Load sensing (can be disabled)
Setup Memory
Non-volatile EEPROM
INSTEON Features
INSTEON Addresses
1 hard-coded out of 16,777,216 possible
INSTEON Links
417 out of 16,777,216 possible
INSTEON Powerline Frequency
131.65 KHz
INSTEON Minimum Transmit Level
3.2 V
pp
into 5 Ohms
INSTEON Minimum Receive Level
1 mV
pp
nominal
INSTEON Messages Repeated
Yes
X10 Features
X10 Primary Address
1 optional (comes unassigned)
X10 Scene Addresses
255 possible
X10 Status Response
Supported
X10 Resume Dim
Supported (by setting X10 Primary Address On-Level to zero)
X10 Powerline Frequency
120 KHz
X10 Minimum Transmit Level
3.2 V
pp
into 5 Ohms
X10 Minimum Receive Level
10 mV
pp
nominal
X10 Messages Repeated
No
Mechanical
Operating Conditions
Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions
4.0” H x 2.5” W x 1.5” D
Weight 5
oz
Electrical
Supply Voltage
120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection
MOV rated for 150 Volts
Power Plug
3-pin grounded (2456D3), 2-pin polarized (2456D2)
Pass-through Outlet
3-pin grounded (2456D3), 2-pin polarized (2456D2)
Controlled Outlet
3-pin grounded (2456D3), 2-pin polarized (2456D2)
Load Types
Plug-in incandescent lighting devices
Maximum Load
300 Watts
Minimum Load
25 watts (for Local Control load sensing)
Certification
Safety tested for use in USA and Canada (ETL #3017581)
