FOR USE BY QUALIFIED PERSONNEL ONLY
Advanced Controller Functions
Automatic Shut Off
The automatic shut off function is designed to
reduce electrical usage when the Insta heat seal
machine is idle. When active, any user input such as
key presses or starting a heat press cycle will reset
the timer for the automatic shut off.
The automatic shut off has a
non-adjustable timer
of 2 hours
. By default, the automatic shut off is
Setting the Automatic Shut Off
The automatic shut off can be set to
ON
1.
Press
MODE
to cycle to the
TIMER.
→
2.
Press and hold
UP
and
DOWN
for 3 to 5
seconds to turn the automatic shut off
or
OFF
.
a.
ONE
beep indicates that the
automatic shut off is
OFF
b.
TWO
beeps indicate that the
automatic shut off is
ON
Changing the Temperature Scale
1.
Press
MODE
to cycle to the
TEMPERATURE
→
2.
Press and hold
UP
and
DOWN
seconds to switch the temperature scale.
+ →
FOR USE BY QUALIFIED PERSONNEL ONLY
Advanced Controller Functions
The automatic shut off function is designed to
reduce electrical usage when the Insta heat seal
machine is idle. When active, any user input such as
eat press cycle will reset
adjustable timer
By default, the automatic shut off is
on
.
ON
or
OFF
.
TIMER.
for 3 to 5
seconds to turn the automatic shut off
ON
beep indicates that the
OFF
.
that the
ON
.
ture Scale
TEMPERATURE
.
DOWN
for 3 to 5
seconds to switch the temperature scale.
Setting the Temperature Offset
1.
Switch the temperature scale to Fahrenheit.
2.
Let the platen temperature stabilize. Use a
heat-reading tool such as a
temperature strips to find the temperature
at the center of the platen.
3.
Enter the temperature offset adjust
pressing and holding
MODE
5 seconds.
+ →
4.
XX is the current temperature offset. Press
SET
and
UP
to increase the offset.
Increasing the offset will increase the
display temperature by the corresponding
amount.
+ →
→
Press
SET
and
DOWN
offset. Decreasing the offset will decrease
the display temperature by the
corresponding amount.
+ →
→
5.
Change the offset so that the display
temperature matches the temperature
measured in step 1.
6.
When the desired temperature offset has
been reached, press and hold
SET
for 3 to 5 seconds to exit
+
NOTE:
For the best accuracy, it is suggested
that the temperature offset adjustment
be done in the Fahrenheit scale.
8
Setting the Temperature Offset
Switch the temperature scale to Fahrenheit.
e platen temperature stabilize. Use a
reading tool such as a pyrometer or
temperature strips to find the temperature
at the center of the platen.
temperature offset adjust by
MODE
and
SET
for 3 to
→
XX is the current temperature offset. Press
to increase the offset.
Increasing the offset will increase the
display temperature by the corresponding
→
to decrease the
offset. Decreasing the offset will decrease
the display temperature by the
corresponding amount.
→
Change the offset so that the display
temperature matches the temperature
ired temperature offset has
been reached, press and hold
MODE
and
for 3 to 5 seconds to exit.
the best accuracy, it is suggested
that the temperature offset adjustment
be done in the Fahrenheit scale.
