Insta 256 Series, Руководство по эксплуатации и обслуживанию

Страница: 9 / 28

8
FOR USE BY QUALIFIED PERSONNEL ONLY
Advanced Controller Functions
Automatic Shut Off
The automatic shut off function is designed to
reduce electrical usage when the Insta heat seal
machine is idle. When active, any user input such as
key presses or starting a heat press cycle will reset
the timer for the automatic shut off.
The automatic shut off has a non-adjustable timer
of 2 hours . By default, the automatic shut off is
Setting the Automatic Shut Off
The automatic shut off can be set to
ON
1. Press MODE to cycle to the TIMER.
→
2. Press and hold UP and DOWN for 3 to 5
seconds to turn the automatic shut off
or
OFF
.
a. ONE beep indicates that the
automatic shut off is OFF
b. TWO beeps indicate that the
automatic shut off is ON
Changing the Temperature Scale
1. Press MODE to cycle to the TEMPERATURE
→
2. Press and hold UP and DOWN
seconds to switch the temperature scale.
+ →
Setting the Temperature Offset
1. Switch the temperature scale to Fahrenheit.
2. Let the platen temperature stabilize. Use a
heat-reading tool such as a pyrometer
temperature strips to find the temperature
FOR USE BY QUALIFIED PERSONNEL ONLY
The automatic shut off function is designed to
when the Insta heat seal
machine is idle. When active, any user input such as
key presses or starting a heat press cycle will reset
adjustable timer
c shut off is on .
ON
or
OFF
.
TIMER.
for 3 to 5
seconds to turn the automatic shut off
ON
beep indicates that the
OFF .
that the
ON .
Changing the Temperature Scale
TEMPERATURE .
DOWN for 3 to 5
seconds to switch the temperature scale.
Switch the temperature scale to Fahrenheit.
Let the platen temperature stabilize. Use a
pyrometer or
temperature strips to find the temperature
at the center of the platen.
3. Enter the temperature offset adjust
pressing and holding MODE
5 seconds.
+ →
4. XX is the current temperature offset. Press
SET and UP to increase the offset.
Increasing the offset will increase the
display temperature by the corresponding
amount.
+ →
→
Press SET and DOWN
offset. Decreasing the offset will decrease
the display temperature by the
corresponding amount.
+ →
→
5. Change the offset so that the display
temperature matches the temperature
measured in step 1.
6. When the desired tempera
been reached, press and hold
SET for 3 to 5 seconds to exit
+
NOTE:
For the best accuracy, it is suggested
that the temperature offset adjustment
be done in the Fahrenheit scale.
at the center of the platen.
temperature offset adjust by
MODE and SET for 3 to
→
XX is the current temperature offset. Press
to increase the offset.
Increasing the offset will increase the
display temperature by the corresponding
→
to decrease the
fset. Decreasing the offset will decrease
the display temperature by the
corresponding amount.
→
Change the offset so that the display
temperature matches the temperature
When the desired temperature offset has
been reached, press and hold MODE and
for 3 to 5 seconds to exit.
For the best accuracy, it is suggested
that the temperature offset adjustment
be done in the Fahrenheit scale.