Inspur NP5540M3, Руководство пользователя

Страница: 43 / 80

37
Chapter Six Install Operating System
(3) After you select the corresponding operating system and the controller driver
to be made according to the actual need, click [Next] button and make corresponding
driver. Different operating systems correspond to different making interfaces and meth-
ods of the driver.
● Driver making of Windows system
When the driver of Windows operating system is made, copy the driver directly
into the virtual floppy drive A: of Inspur driver U disk.
Select the Windows version to be installed and driver to be made, and then click
[Next].
The system will display a prompt as shown in the following picture. Please con-
firm that Inspur driver U disk is well connected. Format the virtual floppy drive A: of
Inspur driver U disk, and then click [OK] to start the driver making.
After the driver making is completed, the system will pop up the window, prompt-
ing “Driver has been completed”. Click <OK> to complete the making of driver.
● Notices for using Inspur driver U disk to load driver under windows system
During the installation of Windows operating system, if the driver of hard disk
controller is loaded by using Inspur driver U disk, entering the interface of disk parti-
tion, Inspur driver U disk will occupy a disk letter. If the disk is not partitioned, U disk
will occupy disk C:. If the disk has other partitions, U disk will occupy other disk letter
(please distinguish according to the actual hard disk partition).
If there are other partitions on the disk, at this moment, it needs to delete all of
them and then create new partitions on the hard disk. The U disk will not occupy disk
letter any more.