Inspur NP5540M3, Руководство пользователя

Страница: 25 / 80

19
Chapter Three System Setup
abled] and [Disabled] (default configuration) two items.
● System Event Log
This menu shows the features of system event log. Any configuration modification
in this menu will take effect only after system restart.
* SEL Components
This item is used to set whether the system shall record all the logs from system
starts, including [Enabled] and [Disabled] (default configuration) two items. If it is set
to be [Enabled], the user can also set the log-clear method and other configurations.
* Erasing SEL
This item is used to configure the method of log clearance. It includes the follow -
ing three items:
[No] (default configuration): the system has no log erasing setup.
[Yes, On next reset]: erase the log on the next reset.
[Yes,On every reset: erase the log on every reset.
* When SEL is Full
This item is used to set the approach when event logs reach the maximum record
number. It includes the following two items:
[Do nothing] (default configuration): do nothing about the log.
[Erase Immediately]: erase the log immediately.
● BMC Network Configuration
This menu is used to set up the configuration information of BMC network inter
-
face.
* Lan channel 1
Related items of this menu can be used to setup the access method to IP address
when 82574 network card 1st works as multiplex management interface
When it is set to [Static], the user has to manually set the information, such as IP
address, subnet mask and router IP address. When it is set to [Dynamic] (default con-
figuration), the user does not need to set the previous items.
*Lan channel 2
Related items of this menu can be used to set up the access method to IPMI man-
agement dedicated interface IP address. When it is set to [Static], the user has to manu-
ally set the information, such as IP address, subnet mask and router IP address. When
it is set to [Dynamic] (default configuration), the user does not need to set the previous
items.