44
2.
Insert the PSU into the power supply bay until it clicks into a locked position.
3.
Power on the server and verify that the PSU LED is green.
4.4.11
OCP NIC Replacement
To prevent damage to the server or expansion boards, power down the server
and remove all power cables before removing or installing the OCP NIC.
To remove the OCP NIC:
1.
Loosen the thumbscrew securing the OCP NIC to the chassis anticlockwise.
Figure 4-34 Loosening the Thumbscrew
2.
Pull the OCP NIC horizontally out of the chassis.
Figure 4-35 Removing the OCP NIC
3.
Put it into an antistatic bag
