63
BIOS Setup
3.3.1 Update BIOS under DOS
To update BIOS under DOS, it needs to use DOSFlash toolkit, which can be used to
update 8M BIOS file and 16M BIOS+ME file.
Operation steps:
1.
Copy the DOSFlash toolkit containing BIOS bin files for update into DOS boot
disk, and start the system to enter DOS.
2.
Open DOSFlash folder, Flash.bat is the script used to update 8M BIOS,
MEflash.bat is the script used to update 16M BIOS+ME.
3.
If there is no change of ME, only update BIOS. Execute the command: flash
BIOS.bin, and BIOS.bin is the BIOS file to be updated. The flash process is as
shown in the following figure:
Note:
it is suggested to shut down the system first and then startup, after the flash is
completed.
If ME is changed, it needs to update BIOS version and ME. Execute the command:
meflash BIOS.bin. The flash process is as shown in the following figure:
