Inspur NF3120M5, Руководство пользователя

Страница: 63 / 196

57
BIOS Setup
TPM2.0 UEFI Spec
Version
Select the TCG2 specification version. TCG_1_2: win8/win10
compatibility mode. TCG_2: Supports the new TCG2 protocol
and the event format of win10 or higher. Options include:
TCG_1_2
TCG_2
TCG_2
Physical Presence Spec
Version
Select the physical presence specification version. Select
this option to tell the operating system to support the PPI
specification version 1.2 or 1.3. Options include:
1.2
1.3
1.3
Device Select
TPM 1.2 will limit support for TPM 1.2 devices; TPM 2.0 will
limit support for TPM 2.0 devices; Auto will also support the
default setting, that if TPM 2.0 devices are not found, TPM 1.2
devices will be enumerated. Options include:
TPM 1.2
TPM 2.0
Auto
Auto
8 .3.2.7 APM Configuration
This option is used to set the system’s wakeup mode and sleep mode.
Interface Parameters Function Description Default Value
Restore AC Power Loss
If set to [Power Off], the system will remain off when the
system restores on AC power loss. If set to [Power On], the
system will be on after the power is interrupted. If set to [Last
State], the system settings will be restored to the state before
the power was interrupted.
[Power On]
Power On By PCI-E/PCI
[Disabled] Disable wakeup events caused by PCIE devices.
[Enabled] Enable the wakeup event caused by PCIE device.
[Enabled]
Power On By RTC
[Disabled] Disable the wakeup event caused by RTC.
[Enabled] When set to [Enabled], the RTC Alarm Date (Days)
and Hour/Minute/Second options allow the user to set the
desired value.
[Disabled]