15
Inspur proprietary and confidential information
Copyright © Inspur Electronic Information Industry Co., Ltd.
The CMC network port IP address has been set.
Internet Explorer 8.0/9.0/10.0, Firefox 9.0 has been installed on
the terminal.
The terminal is connected to the CMC network port on the
target server over the network.
Procedure
1. In the address box, enter
http://xxx.xxx.xxx.xxx(xxx.xxx.xxx.xxx is the static CMC
ip address that has been set)
2. Enter the user name root and the default password, and
click Log In.
3. Choose Configuration > CMC Network. On the displayed
page, check that the IP address obtaining mode, IP address,
subnet mask, default gateway, and MAC address of the
CMC are displayed.
4. Select Automatically obtain IP address and check that all
parameters below are unavailable.
5. Select Manually set IP address, enter an IP address, subnet
mask, and default gateway, and click Save. Ensure that the
new IP address is on the same network segment as that of
the terminal.
6. Use the new IP address to log in to the CMC WebUI.
Expected result
1. The IP address is properly configured.
2. The new IP address, subnet mask, and gateway are
displayed on the WebUI.
3. The new IP address takes effect and can be used to log in.
Description
Acceptance options.
Table 2- 4 Web Interface
—
Firmware Upgrade on the WebUI
