9
TIP:
Put the communication wires and resistance adjust knob wire into the upright post and make sure
all screws are in the hexagonal hole before tightening all bolts.
STEP 4
Attach the wave spring washer (39) to the axle (15), then attach the body arm set (5) to the axle (15)
and tighten it with flat washer (33) and Allen C.K.S. full thread screw (37).
STEP 5
1. Attach the left body arm (6) to the body arm set (5), tighten it with curved washers (35), Allen
C.K.S. half thread screws (40) and Hex self-locking nuts (36).
2. Attach the upper body arm covers (17, 18) to the left body arm (6) with Philips C.K.S. self-
tapping screws (38).
