Inspired by drive CSI-2000, Руководство пользователя

Страница: 23 / 24

23
Care and Maintenance
Cleaning the Cover
• Spot clean with upholstery shampoo, foam from a mild detergent, or
mild dry cleaning solvent. Do not saturate with liquid.
• Pile fabrics may require brushing to restore appearance.
• To clean the harness straps, use a sponge, warm water and mild
detergent. Do not use abrasive cleansers.
• To clean the buckle, use a damp cloth and mild detergent. Do not use
abrasive cleansers.
• Do not disassemble the harness.
Removing the Cover
1. Remove the soft support pads (if present) by releasing the lanyards
from the underside of the cover.
2. Open the chest retainer clip and release the metal latches from the
buckle.
3. Remove harness completely by fi rst locating the metal bracket
securing the top of the harness along the back side of the child
restraint. Pull it away to expose 3 to 4 inches (76.2 to 101.5 mm) of
the webbing.
4. Turn the metal bracket so the short side will fi t through the slot in the
back of the child restraint and push it through the slot and the cover
(from back to front).
5. Push those same metal brackets through the lower side harness slots
(from front to back). The harness assembly should slide out the back
of the child restraint. Make sure not to disassemble the 3-bar metal
bracket that fastens the harness assembly together.
6. Remove the cover by lifting the edges of the cover over the shell of
the child restraint.
Refi tting the Cover
• The cover, harness and pads can be reinstalled by the following the
preceding instructions in reverse.