FOOT BOLSTER
1.
Remove the Positioning Pod and
Bolster from the Bean Bag Base.
2. Lap the two straps of the Foot Bolster
on top of the Bean Bag (Fig 14). Attach
the hook and loop of the straps to the
rear of Bean Bag (Fig. 15).
3.
Place the Bolster and Positioning Pod
back on the P Pod. Buckle the Foot
Bolster to the straps making sure the
flat side of the Foot Bolster is facing up
(Fig. 16).
4.
Adjust the height of the Foot Bolster by
lengthening or shorten the straps (Fig.
17).
Figure 14
Figure 15
Figure 16
Figure 17
8
ACCESSORIES
