1. Remove all of the P Pod parts from
the packaging and separate the
parts from each other if necessary.
2.
Give the Bean Bag Base and the
Bolster Support a good shake to
agitate the beads inside.
3. Attach the Bolster Support to the
Bean Bag Base by aligning the
hook and loop straps and press
down (Fig 1).
4.
Place the Positioning Pod on the
Bolster and Bean Bag. Secure all
of the hook and loop straps on
Positioning Pod to the Bean Bag
Base (Fig 2).
5. Adjust the P Pod so that it is in a
reclined position (Fig. 3A) prior to
placing the user into the Pod.
Figure 1
Figure 2
Figure 3B
Figure 3A
4
ASSEMBLY OF THE P POD
