•
Do not use bleach.
•
Do not iron.
•
It is recommended that P Pod covers NOT be washed with other items.
Seat Cover
1.
Remove the Positioning Pod from the Bean
Bag and Bolster. Unbuckle the Pelvic Belt
from the back and push the straps through
the slots (Fig 22). Remove the cover from the
Positioning Pod.
2.
Fold back all of the seat straps (Fig. 23) to
prevent the hook parts from damaging the
cover during cleaning.
3. Unzip the Flip-over Headrest cover and
remove the inner foam (Fig. 24).
DO NOT
try to wash the inner foam as it is sealed
in a special membrane and it CANNOT be
removed under any circumstances.
Simply
wipe the foam with damp cloth.
4.
Follow the washing instruction label on the
inside of the Seat Cover.
5.
After cleaning, install the Seat Cover back
on the Positioning Pod. Make sure that the
washing labels are positioned at the top of the
seat (Fig. 25).
Bolster Support and Bean Bag Covers
6.
Unzip the outer covers of the Bolster Support
and Bean Bag and remove the inner bags that
contain beads.
DO NOT
attempt to unzip the
inner bags.
7. Follow the washing instruction label.
Positioning Pod
8. Wipe the Positioning Pod with mild detergents.
9. Air dry the Positioning Pod.
DO NOT
use
excessive heat to dry the Positioning Pod
as the shape of the seat can be damaged or
deformed by the heat.
Figure 23
Figure 24
Figure 25
Figure 22
10
CLEANING
