Inspire HYP1 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 19

Inspire HYP1 Скачать руководство пользователя страница 3

IMPORTANT SAFETY INSTRUCTIONS

Please read this entire manual and familiarize yourself with all decals and
warnings before using this hyper extension.

•

WARNING!

It is necessary to inspect this hyper extension regularly to

maintain safety and proper function. Please use the maintenance schedule
included towards the back of this manual. Immediately replace any and all
defective or worn parts. See General Maintenance section for complete
details.

• Use this hyper extension for its intended purpose as described in this
Operation Manual.

• Make sure bystanders are at least 5 feet away from the hyper extension

while it is in use.

• Keep children away from the hyper extension at all times.

• Keep the hyper extension away from walls and clear of any obstructions

and furniture.

• Stop immediately if you experience shortness of breath, pain, or dizziness
during your workout. Inspire Fitness strongly recommends consulting your
doctor before starting an exercise program.

TOOLS REQUIRED FOR ASSEMBLY

• Standard socket set (including 17mm & 19mm sockets)
• 17mm wrench
• 19mm wrench

• 6mm Allen wrench

Page 1

«
1
2
3
4
5
...
»

Содержание HYP1




















Отзывы:

Нет отзывов