STEP 3 (See FIGURE 3)
A.) Assemble Seatback (#8) onto Seat Slider Assembly. Align lower holes and secure using qty 2 M8 Flat Washers
(#33), qty 2 M8 Lock Washers (#32) and qty 2 M8 x 16mm Socket Screws (#31).
B.)
Choose a preferred Seatback Recline Angle.
The seatback (#8) may be installed in 3 different Recline
Angles (UPPER, MIDDLE, LOWER) based on the users’ preferred position. Align upper seatback tube
threaded hole with preferred hole based on the below figure. Secure using qty 2 M8 Flat Washers (#33), qty 2
M8 Lock Washers (#32) and qty 2 M8 x 16mm Socket Screws (#31).
C.) Secure seat bottom pad (#35) to Seat Slider Assembly using qty 4 Flat Washers (#33) and qty 4
M8x16mm Socket Screws (#31).
