10
Installation Instructions
Operating Instructions
Before operating, slightly open ball valve.
Place the overflow tube into the drain at the bottom of
waste collector tank.
INITIAL SETUP AND VERIFICATION (cont.)
For 3 Phase units only –
Ensure pump motor fan is
rotating clockwise (when viewed from the motor end).
If rotation is counter-clockwise, turn off power supply,
open front panel, and switch L1 and L2 connections.
Turn off unit by pressing the STOP button. Indicator
light turns off.
NOTE:
If the unit does not turn off, see Troubleshooting.
MAIN OPERATION
Plume
Hose
Closed
Slightly
Open
Ball Valve
1
Overflow
Tube
Waste
Collector
Tank
2
1 ON
0 O
F
F
L1 L2 L3*
3a
Incoming Power
Supply
Panel
Ground
Plug
*NOTE: Single Phase models
do not have L3 wire.
Stop
4
Indicator Light
