Property Damage:
Join remaining tube
to cold water supply only.
■
■
Turn on the cold water supply.
■
■
Run water through your unit for
at least 3 minutes to flush lines and filter.
■
■
Check all connections to ensure they are
tight and that there are no leaks.
3
2
Brass Nut
Ferrule
Brass Insert
■
■
At the end of the
white
3/8" tube from the
filter, slide the supplied brass nut and
ferrule over the tube and then push in the
brass tube insert.
■
■
If not already equipped, install a
compression, T-fitting or saddle valve
onto the cold water supply line.
■
■
Insert the
white
3/8" tube into the 3/8"
compression fitting and tighten.
5
FINAL WATER CONNECTION
FILL TANK & THEN CONNECT POWER
If leaks present themselves, turn off water
supply, tighten fittings and repeat step 3.
F-201R Cartridge (included with this system) Chemical & Mechanical Reduction Filter Specifications:
This
cartridge
p
r
o
vides mechanical and chemical reducti
o
n
o
f dirt/rust, taste/
o
d
o
r, chl
o
rine and
p
articulates.
Filter Capacity:
500 gall
o
ns, de
p
ending
o
n l
o
cal water c
o
nditi
o
ns. N
o
te that while the testing was
p
erf
o
rmed under
standard lab
o
rat
o
ry c
o
nditi
o
ns, actual
p
erf
o
rmance may vary. D
o
n
o
t use with water that is micr
o
bi
o
l
o
gically unsafe
o
r
o
f unkn
o
wn quality with
o
ut adequate disinfecti
o
n bef
o
re
o
r after the system. F
o
r c
o
ld water use
o
nly. Systems must be
installed and
op
erated in acc
o
rdance with the Manufacturer’s rec
o
mmended
p
r
o
cedures and guidelines. See warranty
card f
o
r warranty. F
o
r service and
p
arts, c
o
ntact y
o
ur l
o
cal dealer
o
r InSinkErat
o
r® directly at 1-800-558-5700.
Application guidelines/Water Supply Parameters for NSF Testing:
Service fl
o
w
o
f 0.75 g
p
m, c
o
mmunity
o
r
p
rivate well water su
pp
ly, water
p
ressure
o
f 30-125
p
si, water tem
p
erature
o
f 33˚F–100˚F. Exce
p
t as n
o
ted, all
testing
p
erf
o
rmed at
p
H = 7.5 ± 0.5, Fl
o
w: 0.75 g
p
m, Pressure: 60
p
si, Tem
p
: 20˚± 3˚C.
Contact an authorized InSinkErator service agent for repairs or replacement components.
Pressure: 30-125 psi
Temperature: 33
º
F - 100
º
F
Flow Rate: 0.75 gpm
Capacity: 500 gallons
System Tested and Certified by NSF Internati
o
nal
against NSF/ANSI Standard 42 f
o
r the reducti
o
n
o
f
Chl
o
rine taste and
o
d
o
r and N
o
minal Particulate Class I.
FINAL WATER CONNECTION
TURN ON WATER & CONNECT POWER
