Insignia NS-TDRE75W1 Скачать руководство пользователя | Manualshive

Страница: 39 / 44

background image

39

10-Cycle Electric and Gas Dryers

www.insigniaproducts.com

USER MAINTENANCE INSTRUCTIONS

Maintaining your dryer

Cleaning the exterior

• Clean with a soft, damp cloth. Do not use abrasive substances.
• Protect the surface from sharp objects.
• Do not place any heavy or sharp objects or a detergent box on the dryer.

Keep them in a separate storage area. These items may scratch or damage
the top cover of the dryer.

• Because the entire dryer has a high-gloss finish, the surface can be scratched

or damaged. Avoid scratching or damaging the surface when using the dryer.

Cleaning the drum

• Clean with a damp cloth dampened with a mild, non-abrasive cleaner

suitable for stainless steel and anodized surfaces.

• Remove the cleaner residue and dry with a clean cloth.

Cleaning the control panel

• Clean with a soft, damp cloth. Do not use abrasive substances.
• Do not spray cleaners directly on the panel. The control panel finish may be

damaged by some laundry pre-treatment soil and stain remover products.
Apply such products away from your dryer and wipe up any spills or
over-spray immediately.

Cleaning and inspecting the exhaust system

Inspect and clean the exhaust yearly to maintain optimum performance.

1

Disconnect the exhaust duct from the dryer and from the exhaust hood (at the
exhaust outlet) outside of the building.

2

Check the interior of the duct and remove any lint accumulation.

3

Make sure that lint is removed from the exhaust hood. Lint may collect in the
exhaust hood so that the flappers or louvers will not open or close completely.

4

After cleaning the exhaust hood, make sure that the flapper or louvers move
freely.

5

Reassemble the exhaust duct and hood, making sure that the joints are secure
and sealed.

6

Operate your dryer and make sure that the exhaust air is not obstructed in the
vent and that there are no leaks in the system.

Note:

Check and clean the outside exhaust hood frequently to ensure a proper

air flow.

WARNING

Certain internal parts are intentionally not grounded and
may present a risk of electric shock only during servicing.
Service Personal: Do not contact the following parts while
the appliance is energized: Control Board and
Temperature-Regulating Thermistor (located on the Blower
Housing).

«
...
37
38
39
40
41
...
»

Содержание NS-TDRE75W1













































Отзывы:

Нет отзывов

Похожие инструкции для NS-TDRE75W1

Бренд: ultron Страницы: 3

Бренд: Laifen Страницы: 43

TurboBooster 3400 Ergolight

Бренд: Wahl Страницы: 72

Бренд: T-Fal Страницы: 16

Бренд: Taurus Страницы: 83

Smart Oven Air Fryer SOV860

Бренд: Sage Страницы: 84

Бренд: Conair Страницы: 8

Бренд: Kalorik Страницы: 62

Бренд: Campomatic Страницы: 30

Бренд: Blue Dry Страницы: 5

Бренд: Giani Страницы: 28

Бренд: Neumaerker Страницы: 7

Бренд: Podab Страницы: 12

Digital Sensor 6500FRE

Бренд: BaByliss Страницы: 37

Бренд: Anetsberger Brothers Страницы: 24

Бренд: GE Страницы: 128

Бренд: GE Страницы: 24

Бренд: NEFF Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды