Insignia NS-TDRE75W1 Скачать руководство пользователя | Manualshive

Страница: 43 / 44

background image

43

10-Cycle Electric and Gas Dryers

www.insigniaproducts.com

USER MAINTENANCE INSTRUCTIONS

• Customer instruction/education
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to weather, lightning, and other acts of God, such as power surges
• Accidental damage
• Misuse
• Abuse
• Negligence
• Commercial purposes/use, including but not limited to use in a place of business or in

communal areas of a multiple dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.

• Modification of any part of the Product, including the antenna
• Display panel damaged by static (non-moving) images applied for lengthy periods

(burn-in).

• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Insignia to service the Product
• Products sold “as is” or “with all faults”
• Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
• Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly

illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up to
five (5) pixel failures throughout the display. (Pixel based displays may contain a limited
number of pixels that may not function normally.)

• Failures or Damage caused by any contact including but not limited to liquids, gels or

pastes.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY
FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:

1-877-467-4289

www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
*Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.

«
...
41
42
43
44
»

Содержание NS-TDRE75W1













































Отзывы:

Нет отзывов

Похожие инструкции для NS-TDRE75W1

Бренд: V-ZUG Страницы: 44

Megane 2200 Advance

Бренд: Taurus Страницы: 60

Electric Fryer - Boiler - Steamer

Бренд: Cajun Injector Страницы: 42

Supercare PRO AC7200

Бренд: Remington Страницы: 88

Бренд: REVLON Страницы: 32

Бренд: T3 Страницы: 27

TKG FTL 1090 BU

Бренд: Team Kalorik Страницы: 60

Бренд: Grundig Страницы: 27

Бренд: Saivod Страницы: 44

Бренд: TZS First AUSTRIA Страницы: 32

Бренд: Alpine Страницы: 11

LAVATHERM 76781IH1

Бренд: AEG Страницы: 24

LAVATHERM 8DEC946S

Бренд: AEG Страницы: 28

Бренд: Kenmore Страницы: 14

Бренд: Tricity Bendix Страницы: 12

Бренд: Siemens Страницы: 8

Бренд: Siemens Страницы: 8

Бренд: Siemens Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды