72
Insignia 32" LED TV
www.insigniaproducts.com
Update the TV firmware
If your TV is behaving oddly and you have tried all
the solutions in the troubleshooting pages, you
may need to update the TV firmware.
1
Go to
www.insigniaproducts.com
, then click
Support & Service
. Enter your model number
in the box under
Manual, Firmware, Drivers &
Product Information
, then click
X
.
2
Follow the instructions in the
Firmware
Installation Guide
on the Insignia website to
download the firmware update and copy it to a
USB flash drive.
3
Plug the USB flash drive into the
USB
port on
the side of your TV.
4
Press
MENU
. The on-screen menu opens.
5
Press
W
or
X
to highlight
SETTINGS
, then press
T
or
ENTER
. The
SETTINGS
menu opens.
6
Press
S
or
T
to highlight
System Info
, then
press
ENTER
. The
SETTINGS · SYSTEM INFO
menu
opens.
7
Press
S
or
T
to highlight
Update Firmware
,
then press
ENTER
. A message asks if you want
to update the TV firmware.
8
Highlight
Yes
, then press
ENTER
.
If you have plugged in a USB flash drive with the
firmware update, the firmware update starts
automatically. Otherwise, a screen opens with
instructions about how to download the
update. Follow the instructions, then press
ENTER
.
While your TV installs the firmware update, your
TV displays a status screen.
Do not turn off
your TV until the update is complete.
9
When the update is complete, unplug the USB
flash drive, then press
ENTER
. Your TV turns off
then on to complete the update.
10
If the channel list has been deleted and the
TV
Setup
wizard opens, go through the
TV SETUP
wizard. For more information, see “
” on page
.
Cautions
• Make sure that you have tried all other
solutions before you upgrade the
firmware.
• While the firmware is updating, do not
turn off your TV.
Note
To update the TV firmware, you need a:
• Computer with an available USB port
• High-speed Internet connection
• USB flash drive
Note
• If you see a message that says the
firmware file is incorrect, make sure
that you have downloaded the correct
file for your model.
• If you see a message that says the
update failed or the TV screen is blank
and the power LED is blinking red
then blue, turn off your TV, turn it back
on, then run the upgrade again.