www.insigniarange.com
Last Modified: 31/08/2018
13
Step 4
Apply
RubberGum
to the bottom of the remaining back panel and position the panel
to the completed front frame in the position shown in the image marked
“
1
”
Once you have met the back panel inside the front upright as per the close up image
walk the panel around to the position shown in the image marked
“
2
”
Now repeat for the other side
1
2
1
Step 5
Now you have locked the two back panels in position,
Rubbergum
the
bottom of the column and align the back panels to the central column.
Once you are happy with the alignment, run a bead of silicone up the
edge of the column and fix together using the
ST20
screws and
SW9
Washers as per the image.
(please note, if your column has a rubber seal at the bottom , take the
rubber off and apply silicone inside the rubber and replace)