www.insigniarange.com
Last Modified: 31/08/2018
12
Step 2
Push the
“
U Shape
”
glass seal onto the glass panel prior to insertion into the frames.
Please ensure the thin seal is on the entrance side of the panels with the thicker to
the rear side.
The next step is to attach both front fixed glass panels. In order to do this take the
glass panel and offer it up to the upright as shown by the arrows.
Step 3
The next step is to attach both front uprights and the top rail. In order to
do this insert the front uprights over the glass seal as push on tightly as
directed by the arrows in the image. Now attach the top rail (wide rail
with logo) and then screw into place using the
ST35
screws
Now place your completed front frame on the front of
the shower tray as per the image on the right
Once the top rail is in place, secure the front uprights to the top
and bottom rails (from inside the cabin) using ST14 screws
Then continue to
Rubbergum
along the bottom curved
frame
