Inseego Wavemaker PRO FX2000e, Руководство пользователя

Страница: 41 / 84

5G INDOOR CPE FX2000e USER GUIDE 41
SIM Management (Inseego Connect)
NOTE:
These SIM Management settings are available with Inseego Connect.
Global SIM Settings
Enable Roaming: When the ON/OFF slider is ON , roaming is enabled.
Enable Automatic SIM Switching:
When enabled, the SIM is switched automatically if the active SIM
is disconnected. When OFF , you can manually switch between SIMs and change SIM configurations.
Enable Connectivity Switching:
When enabled, connectivity failover monitors connection health and
switches the SIM if there is loss of connectivity to the network, based on the timer set below.
Connectivity Failover Timer: Enter the number of seconds of connectivity loss needed to trigger
failover.
Enable Signal Strength Switching:
When enabled, the SIM is switched automatically if signal
strength is below the defined threshold (dBm).
SIM Configuration
NOTE: To manually configure SIM settings in this section, all switching fields above must be disabled.
Priority:
Select the SIM you want to be active.
IMSI:
The International Mobile Subscriber Identity (IMSI) for your FX2000e. This is a unique number,
usually fifteen digits, that identifies a Global System for Mobile Communications (GSM) subscriber.
Carrier:
The cellular carrier associated with the SIM.