Inseego Wavemaker PRO FX2000e Скачать руководство пользователя

Страница: 49 / 84

5G INDOOR CPE FX2000e USER GUIDE

Diagnostics Tab

This tab displays detailed information used solely for troubleshooting or technical support.

Modem

Mobile Number (MDN):

The phone number of your FX2000e.

IMEI:

The International Mobile Equipment Identity (IMEI) for your FX2000e. This is a 15 digit code used

to uniquely identify an individual mobile station. The IMEI does not change when the SIM is changed.

IMEISI:

A combination of the IMEI and an approval number for this type of device.

FW Version:

The version of the firmware (software) currently installed on your FX2000e.

SIM Version:

The version of the SIM card. This field is blank if there is no SIM card installed, or a SIM

error condition exists.

ICCID:

The unique ID number assigned to the SIM card. This field is blank if there is no SIM card

installed, or a SIM error condition exists.

ERI Version:

The version of the Enhanced Roaming Indicator (ERI) for your FX2000e.

PRL Version:

The version of the Preferred Roaming List (PRL) for your FX2000e.

Network

Status:

The status of the network.

Technology

: Indicates the current cellular data connection, for example, 5G.

Network Operator:

The name of the Mobile Network Operator (MNO).

Signal Strength (RSRP):

The

strength of the cellular signal, measured in dBm. Higher absolute values

indicate a stronger signal, for example: -80 dBm is a stronger signal than -90 dBm.

Содержание Wavemaker PRO FX2000e





















































































Результаты поиска

Содержание Wavemaker PRO FX2000e

Отзывы:

Похожие инструкции для Wavemaker PRO FX2000e

Бренды по названию

Популярные бренды

Inseego Wavemaker PRO FX2000e, Руководство пользователя

Результаты поиска

Содержание Wavemaker PRO FX2000e

Отзывы:

Похожие инструкции для Wavemaker PRO FX2000e

Бренды по названию

Популярные бренды