SKYUS 100BSERIES USER GUIDE
98
While operating a vehicle
Thedriveroroperatorofanyvehicleshouldnotoperateawirelessdatadevicewhileincontrolofa
vehicle.Doing sowilldetract from thedriver or operator's controlandoperation ofthat vehicle.In some
countries,operatingsuchcommunicationsdeviceswhileincontrolofavehicleisanoffense.
Electrostatic Discharge (ESD)
Electricalandelectronicdevicesaresensitivetoelectrostaticdischarge(ESD).Macintoshnative
connectionsoftwaremightattempttoreinitializethedeviceshouldasubstantialelectrostatic
discharge reset the device. If the software is not operational after an ESD occurrence, then restart your
computer.
ROHS COMPLIANCE
As a part of Inseego’s corporate policy of environmental protection, Inseego takes every step to ensure
thatdevicesaredesignedandmanufacturedtocomplytotheEuropeanUnionDirective2015/863
amending 2011/65/EU for the Restriction of Hazardous Substances (RoHS).
Installation and Operating Instructions
Temperature code, T4
SUITABLEFORUSEINCLASSI,DIVISION2,GROUPSA,B,C,DHAZARDOUSLOCATIONS,OR
NONHAZARDOUS LOCATIONSONLY.
THESEDEVICESAREOPENTYPEDEVICESTHATAREINTENDEDTOBEINSTALLEDINATOOL-ONLY
ACCESSIBLE ENCLOSURE THAT IS SUITABLE FOR THE ENVIRONMENT.
WARNING:
EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT WHILE THE CIRCUIT IS LIVE OR
UNLESSTHEAREAISKNOWNTOBEFREEOFIGNITABLECONENTRATIONS/AVERTISSEMENT-RISQUE
D'EXPLOSION. NE PAS DÉBRANCHER PENDANT QUE LE CIRCUIT EST SOUS TENSION OU À MOINS QUE
L'EMPLACEMENT NE SOIT EXEMPT DE CONCENTRATIONS INFLAMMABLES.
ANTENNAS INTENDED FOR USE IN CLASS I, DIVISION 2 HAZARDOUS LOCATIONS MUST BE INSTALLED
WITHIN THE END USE ENCLOSURE. FOR REMOTE INSTALLATION IN AN UNCLASSIFIED LOCATION,
ROUTING AND INSTALLATION OF THE ANTENNAS SHALL BE IN ACCORDANCE WITH NATIONAL
ELECTRICAL CODE REQUIREMENTS (NEC/CEC).
The USB, Serial, ETH ports, and Reset button may only be accessed for equipment set-up, installation
and maintenance within non-hazardous location. These ports and the associated interconnecting
cable shall remain inaccessible within the hazardous location.
Power Adaptor (optionally provided with the product) shall not be used in the hazardous location.
The instructions shall stipulate that if a power adaptor is provided with the equipment, the adaptor
and associated wiring harness may only be used in a non-hazardous (unclassified) location.
