SKYUS 100BSERIES USER GUIDE
71
Click
Save Changes
.
MAC Filter
The MAC filter allows only selected devices to access the Skyus 100B Series network. By default, MAC
filter is turned OFF.
Use this tab to turn the MAC Filter ON and specify device access.
To use the MAC filter, select the device(s) from the device list that you want to be allowed to connect
to the network and move the
ON/OFF
slider to
ON
.
CAUTION:
Turning on MAC filtering immediately disconnects all devices that are not included in the
filter from the network.
NOTE:
This device list includes all devices currently connected to the Skyus 100B Series router, except
those connected via Ethernet.
AddNewDevice
:Usethisbuttontoaddadevicetothedevicelist,thenenterthedevicename,MAC
address, choose whether to select the MAC Address Filter checkbox, and click
SaveChanges
.
To delete a device from the list, select its
Delete
checkbox and click
Save Changes
.
To discard any unsaved changes and refresh the list, click
Refresh List
.
NotesonBlockingDevices
There are two ways to block devices from connecting to the Skyus 100B Series router:
Temporarily block a device from connecting to the router, including devices connected
via Ethernet.
