Version 1.0.0
14
3.2.1 Configure the AP11 as a Bridge
Configure TCP/IP parameters
1. Click
Advanced Config
,
select
Bridging
,
and then click
Enable
for
Bridge Function
as shown in
Figure 3-4
. In the
Bridging Parameter
window, enter the
IP Address
(
default is 192.168.2.1
) and
Subnet
Mask
(
default is 255.255.255.0
) that are suitable for your network
domain. After that, click
FINISH
at the bottom of this page to complete
the modification of this page.
Figure 3-4
Version 1.0.0
15
3.2.2 Configure the AirEther AP11 as a Router with
PPPoE Ethernet connection
Configure TCP/IP parameters
1. Click
Advanced Config
,
select
Bridging
,
and then click
Disable
for
Bridge Function
as shown in
Figure 3-4
. After that, click
FINISH
at the
bottom of this page to complete the modification of this page.
2. If you are an ADSL subscriber, you need to specify that your personal
ISP PPPoE username and password to enable ADSL broadband
access, in here, click
Basic Config
,
select
ISP
(as shown in
Figure 3-
5
),
In this page, enter
MODIFY
button to setup the correct ISP
parameters:
ISP Name
,
ISP Phone
,
PPPoE Username
and
PPPoE
Password
to (as shown in
Figure 3-6
).
Note: Ask your ISP for the correct settings.
Figure 3-5