Version 1.0.0
36
3.11.2 Software Upgrade
1. Click
Utility
,
select
Software Upgrade
page (as shown in
Figure 3-
22
), and then use TFTP to upgrade your AP11. In here, you must
specify the
TFTP server IP
and select which file you want to upgrade.
(
Program image, Web image
), then click
OK
button to start the TFTP
upgrade process.
2.
If the upgrade process is successful, the AP11 will apply the new
settings and start rebooting automatically.
Note: You must set up a TFTP server and this server must contain a
newer image.
Figure 3-22
Version 1.0.0
37
Chapter 4. Telnet Configuration
The AP11 is designed to operate as shipped from the factory without any
special set-up. However, it has many options and parameters that can be
changed if the needed arises. Most of the management functions can be
accessed using the TCP/IP protocol, it can also be configured by Telnet or
RS-232 Console cable.
The administrator can configure the AP11 using a Telnet session on a
wired LAN attached computer. To use the Telnet session, you can
simply open a Telnet window using the IP address that has been
assigned to the AP11.
1. Click
Start
button, select
Run
to open the
Run
dialog box. Enter
telnet
192.168.2. 1
(default terminal type of Telnet is VT100, default IP
address of the AP11 is
192.168.2.1
). Then click
OK
as shown in
Figure
4-1
.
Figure 4-1
.