Menu Operations
36
5.6
Power setting
Here you can set the power output to the LNB. If your receiver is connected to
the LNB directly then you need to set the LNB Power to “On”. If your receiver is
connected to a multi switch (SMATV signal distribution system) then it may be
that you don’t need to provide the power to the LNB. But since this is depending
on the kind of installed distribution system we recommend you to contact your
installer or to refer to the user manual of this system to get the correct
information.
You also just can change this setting and check if you still can receive the
channels. If the LNB Power is off and you still can see all channels then we
recommend this setting in order to save energy.
