ADD/CHANGE A USER CODE:
PROGRAM 1XX
User Codes are located at locations 01-09, 11-19, 21-29, 31-39, 41-49, 51-59, 61-69, 71-79,
81-89 and 91-99 (see table 1A on page 04).
NOTE: New User Codes must use the same number of digits as the (new) Master Code.
[Current Master/Sub-Master/Manager Code] (#) (1)
[2-digit User Location] [New User Code]
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to
add a new User Code of (3) (4) (5) (6) (7) in location 21.
1. Press (1) (2) (3) (4) (5)
•
(#) (1) (2) (1)
•
(3) (4) (5) (6) (7)
••
2. The unit will unlock upon entering the Master Code and will remain unlocked while initiating the
program sequence.
3. Wait at least 5 seconds before trying your User Code
14
DISABLING A MANAGER CODE:
PROGRAM 3XX
Manager Codes are located at locations 00, 10, 20, 30, 40, 50, 60, 70, 80 and 90 (see table 1A on
page 04).
[Current Master/Sub-Master Code] (#) (3) [2-digit Location Code]
EXAMPLE:
Assuming that the current Master or Sub-Master Code is (1) (2) (3) (4) (5) and you want to disable a
Manager Code located at location 20.
1. Press (1) (2) (3) (4) (5)
•
(#) (3) (2) (0)
••
2. Manager Code at the specified location is disabled.