DISABLE USERS ONLY:
PROGRAM 93#
Disable all 90 Users and 5 Service Codes, while managers remain active. If a new user is added while
the unit is in “Disable Users” mode, the new user will overwrite the previous stored code and will
automatically be enabled.
[Master/Sub-Master Code] (#) (9) (3) (#)
EXAMPLE:
Assumign that the current Master or Sub-Master Code is (1) (2) (3) (4) (5) and you want to disable all
the Users.
1. Press (1) (2) (3) (4) (5)
•
(#) (9) (3) (#)
••
2. All Users are now disabled.
ADD SERVICE CODES:
PROGRAM 011, 012, 013, 014, 015
Service Codes are single-entry Codes. They can only be entered or used once. This unit can be
programmed to accept 5 Service Codes. It may be the same code used 5 times, or it may vary from
each. Service Code numbers are 011, 012, 013, 014, and 015.
Service Code 1:
[Master, Sub-Master, Manager Code] (#) (0) [Service Code Number]
[Enter new Service Code]
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to
program Service Code 1 with (3) (4) (5) (6) (7).
1. Press (1) (2) (3) (4) (5)
•
(#) (0) (1) (1)
••
(3) (4) (5) (6) (7)
••
2. Service Code 1 is now programmed for 1 entry with (3) (4) (5) (6) (7) passcode.
3. Repeat procedure for other Service Codes.
10