DISABLE ALL:
PROGRAM 3##
If Master or Sub-Master Code was used to unlock the unit, it will disable all 100 Users/ Managers and
will clear all 5 Service Codes.
[Current Master/Sub-Master Code]
•
(3) (#) (#)
••
If Manager Code was used to unlock the unit, it will disable the users under that manager.
[Manager Code]
•
(3) (#) (#)
••
NOTE: Manager cannot disable themselves.
ENABLE ONE MANAGER OR USER CODE:
PROGRAM 4XX
This feature can be used by Master, Sub-Master or Manager Codes. User Codes can only be enabled
by the Manager in charge of his Bank.
Master and Sub-Master can enable all Manager and Users.
[Master, Sub-Master, Manager Code] (#) (4) [2-digit Location]
EXAMPLE:
Assuming that the current Master, Sub-Master or Manager Code is (1) (2) (3) (4) (5) and you want to
enable a User located at location 21.
1. Press (1) (2) (3) (4) (5)
•
(#) (4) (2) (1)
••
2. User Code at the specified location is enabled.
12