Inovonics 525N, Инструкция по установке и эксплуатации

Страница: 18 / 51

— — 14
Section III
BASIC SETUP AND OPERATION
FRONT-PANEL VS. WEB INTERFACE SETUP
Instructions in this Section cover initial setup of the 525N us-
ing the front-panel buttons and LCD display.
Anything that can be done from the front panel of the 525N
may also be accomplished using the Web interface. Web setup,
offers greater convenience, plus a few additional features and
measurement options. But as tempted as the user may be to
put the 525N on his network right away, we stress the im-
portance of first becoming familiar with the unit from a hard-
ware standpoint, and then investigating remote control capa-
bilities. In a good many installations, the 525N can, and will, be
used without a network connection.
We thus recommend starting with front-panel setup, as this
method not only gives the immediate gratification of a hands-
on experience, but is necessary for initiating network connec-
tivity in the first place.
NAVIGATING THE MENU AND SELECTING OPTIONS
The lower, right-hand side of the LCD display is set aside for
MENU AND ALARMS
identification, leaving the greater part of
the screen area for the high-resolution bargraph display of
POSITIVE PEAK MODULATION
and
NEGATIVE PEAK MODULA-
TION
. The receive frequency is always shown beneath
FREQ
on
the upper line of the display.
In the following discussion of the menu, specific LCD-screen
callouts will be identified in the manual text with this bit-
mapped
MENU ITEM
font.
Display Default
NOTE:
PEAK MODULATION
is the No. 1 screen and the default
display of the front-panel LCD.