User’s Manual -
RNC-1004WL Wireless Router - www.inovia.co.kr
Chapter One: Introduction
Thank you for purchasing TECHNICLAN RNC-1004WL 54M Wireless
Broadband Router. This user guide will assist you with the installation
procedure.
1.1 About RNC-1004WL 54M Wireless Router
RNC-1004WL 54M Wireless Router is a hybrid design product which
combines Ethernet technology and wireless access into a single stand-
alone unit. The device allows you take advantages of both mobility and
fast connection. All PCs whenever on wireless LAN or Ethernet LAN can
share files, printers and other network resource. Moreover, all users can
share single account of Internet access by having this device connect
to a DSL/Cable modem, fixed or dynamic IP, or PPTP.
1.1.1 Ethernet / Fast Ethernet
Ethernet is the most widely-used network access method,
especially in a Local Area Network (LAN) and is defined by the IEEE as
the 802.3 standard. Normally, Ethernet is a shared media LAN. All
stations on the segment share the total bandwidth, which could be 10
Mbps (Ethernet), 100 Mbps (Fast Ethernet). With a switched Ethernet,
each sender and receiver has the full bandwidth. Fast Ethernet is
defined by the IEEE 802.3u standard, a high-speed version of Ethernet
with 100 Mbps transmission rate.
1.1.2 Wireless LAN
Wireless Local Area Network systems (WLANs) transmit and
receive data through the air by using radio frequency (RF). This
offers some advantages like mobility, ease of installation, and
scalability over traditional wired systems.
1.1.3 Mobility
WLANs combine data connectivity with user mobility. This
provides users with access to network anywhere in their organization.
e.g., users can roam from a conference room to their office without
being disconnected from the LAN. This is impossible with wired
networks.
1.2 Package contents
After carefully unpacking the shipping carton, check the
contents listed below.
* 54M Wireless Broadband Router
* A power adapter
4