INOVIA RNC-1004WL Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 40

INOVIA RNC-1004WL Скачать руководство пользователя страница 33

User’s Manual -

RNC-1004WL Wireless Router - www.inovia.co.kr

Appendix 1: FAQ

1. How do I configure the router to access Internet by ADSL users?

1)  First,  configure  the  ADSL  modem  configured  in  RFC1483  bridge
model.
2) Connect the Ethernet cable from your ADSL modem to the WAN port
on the router. The telephone cord plugs into the Line port of the ADSL
modem.
3)  Login  to  the  router,  click  the  “TCP/IP  settings”  menu  on  the  left  of
your  browser,  and  click  "WAN  Interface"  submenu.  On  the  WAN  page,
select “PPPoE” for WAN Connection Type. Type user name in the “User
Name” field and password in the “Password” field

,

to finish by clicking

“Connect”.
4) If your ADSL lease is in “pay-according-time” mode, select
“Connect on Demand” or “Manual” for Internet connection mode. Type
an appropriate number for Time to avoid wasting paid time. Otherwise,
you can select “continuous” for Internet connection mode.

2. How do I configure the router to access Internet by Ethernet users?

1)  Login  to  the  router,  click  the  “TCP/IP  Settings”  menu  on  the  left  of
your  browser,  and  click  "LAN  Interface"  submenu.  On  the  WAN  page,
select “DHCP” for "Client", finish by clicking “apply changes”.
2) Some ISPs require that you register the MAC Address of your adapter,
which  is  connected  to  your  cable  or  DSL  modem  during  installation.  If
your ISP requires MAC register, login to the router and click the "TCP/IP
Setting"  menu  link  on  the  left  of  your  browser,  and  then  click  "LAN
Interface", if your PC’s MAC address is proper MAC address, type your
PC’s  MAC  address  will  fill  in  the  "Clone  MAC  Address"  field.  Or  else,
The  format  for  the  MAC  Address  is  XX-XX-XX-XX-XX-XX.  Then  click
the "apply changes" button. It will take effect after rebooting.

3. I want to use Netmeeting, what do I need to do?

1) If you start Netmeeting as a sponsor, you don’t need to do anything
with the router.
2) If you start as a responsor, you need configure Virtual Server or DMZ
Host.
3)  How  to  configure  Virtual  Server:  Login  to  the  router,  click  the
“Forwarding” menu on the left of your browser, and click "port forward"
submenu.  On  the  "port  forward"  page,  enter  “1720”  into  the  blank
below  the  “Service  Port”,  and  your  IP  address  below  the  IP  Address,
assuming  192.168.1.169  for  an  example,  remember  to  “supply
changes”.

32

«
...
31
32
33
34
35
...
»

Содержание RNC-1004WL









































Отзывы:

Нет отзывов