User’s Manual -
RNC-1004WL Wireless Router - www.inovia.co.kr
DHCP: You can select None, Client, Server. The router is set up by
default as a DHCP (Dynamic Host Configuration Protocol) server,
which provides the TCP/IP configuration for all the PCs that are
connected to the router on the LAN.
DHCP Client Range: This field specifies the first of the addresses
in the IP address pool.
802.1d Spanning Tree: The IEEE 802.1D Spanning Tree Algorithm
(STA) ,loop prevention and redundant link configuration. You can
select disable or enable. if your mode was set WDS or AP+WDS, this
item should be set “enable”
Clone MAC Address: you can enter a MAC, then click clone.
4.6 Network Security
4.6.1 Port Filtering
Entries in this table are used to restrict certain types of data
packets from your local network to Internet through the Gateway.
Use of such filters can be helpful in securing or restricting your
local network.
Enable Port filtering: select it, you can modify port filter.
Port range: input the filter port, e.g. 20-220
Protocol: you can select both, TCP, UDP
Current Filter Table: The list of port filter.
23