Inovance MD320 Series, Руководство пользователя

Страница: 112 / 202

Parameter Description MD320/MD320N User Manual
Setup
value
Function Description
6
7HUPLQDO83
When the frequency is given by the external
WHUPLQDOVLWLVXVHGDVLQFUHPHQWDQGGHFUHPHQW
commands of frequency modification When the
IUHTXHQF\VRXUFHLVVHWWRGLJLWDOVHWXSLWFDQEH
used to adjust the setup frequency.
7 Terminal DOWN
8 Free stop
7KHLQYHUWHUORFNVWKHRXWSXWDQGWKHPRWRUVWRS
process is beyond the inverter control. It is the
general method adopted when there is huge load
and no requirement for the stop time.
This mode is the same as the meaning of coast to
stop as described in F6-10.
9 Fault reset (RESET)
External fault reset function. It is the same as the
IXQFWLRQ RI 5(6(7 NH\ RQ WKH NH\ERDUG 8VLQJ
this function can realize long-distance fault reset.
10 Running pause
7KH LQYHUWHU GHFHOHUDWHV WR VWRS EXW DOO WKH
running parameters are all in the memory
VWDWXVVXFKDV3/&SDUDPHWHUVZLQJIUHTXHQF\
parameter and PID parameter. After this signal
GLVDSSHDUV WKH LQYHUWHU UHVWRUHV WR WKH VWDWXV
before stopping.
11
External fault normally open
input
After the external fault signal is sent to the
LQYHUWHUWKHLQYHUWHUUHSRUWVIDXOWDQGVWRSV
12 MS speed terminal 1
It can realize 16S speed through the combination
of digital status of these four terminals. Refer
attached table 1 for the MS speed function
description.
13 MS terminal 2
14 MS peed terminal 3
MS terminal 4
16
Speed-up/speed-down time
selection terminal 1
It can select four types of speed-up/speed-down
time through the combination of digital status of
these two terminals.
17
Speed-up/speed-down time
selection terminal 2
efesotomasyon.com