12
64 &
over
13.7 &
over
45 & over
Hurricane
Air filled with foam; sea completely white with
driving spray; visibility greatly reduced
(Reference table based on observations of the effects of the wind)
12/ WIND CHILL
Wind chill is the apparent temperature felt on exposed skin due to the combination of air temperature and wind
speed. The wind chill reading on the monitor is calculated based on the temperature measured from the
anemometer (channel-1) and the average wind speed.
13/ GUST WIND & WIND CHILL ALARM
High Gust Wind Alarm
You can set the monitor to sound an alarm for about 1 minute when gust wind reaches or exceeds a set limit.
Press “WIND ALARM” to silence the alarm sound. The related high alarm icons will continue to flash until the
alarm condition is no longer met.
High Gust Wind Alarm Setting:
- Press “WIND ALARM” to show high gust wind alarm display. “ALARM” icons appear in the gust wind
display area
- Hold “WIND ALARM” button to enter its setting mode and gust wind digits will flash
- Press “
▲
”or “
▼
” to set the value
- Press “WIND ALARM” to confirm setting and exit
Press “WIND AL ” repeatedly to enable or disable the gust alarm. “
” appears when it is enabled.
Low Wind Chill Alarm
You can also set the monitor to sound an alarm for about 1 minute when the wind chill reaches or falls below the
set limit. Press “WIND ALARM” to silence the alarm sound. The related low alarm icon will continue to flash until
the alarm condition is no longer met.
Low Wind Chill Alarm Setting:
- Press “WIND ALARM” repeatedly so “ALARM” icons appear in the wind chill display area
- Hold “WIND ALARM” button to enter its setting mode and the wind chill digits will flash
- Press “
▲
”or “
▼
” to set the value
- Press “WIND ALARM” to confirm setting and exit
Press “WIND AL ” repeatedly to enable or disable the wind chill alarm. “
” appears when it is enabled.
14/ MAXIMUM & MINIMUM RECORDS
Press “MEMORY” repeatedly to view the maximum & minimum values of temperature, humidity, heat index, dew
point, wind speed & wind chill readings. The corresponding “MAX” and “MIN” icons will appear. To clear the
memory record, hold “MEMORY” in the max/min display mode
15/ RADIO-CONTROLLED CLOCK
The unit will start synchronizing the radio-controlled clock after battery/adapter installation. The antenna icon will
flash during synchronization. If the reception of radio-controlled time is successful, antenna icon with full signal
strength
will appear on screen. The radio-controlled clock will have a daily synchronization at 02:03 & 03:03
everyday. Each reception cycle is around 2.5 to 10 minutes.
Antenna icon
disappear
Searching for Radio-Controlled Clock
Signal
Reception is
successful
Reception is
fail
Reception is disabled
Antenna icon without signal strength indicates the past reception is not successful (Daily synchronization is still
enabled). To enforce searching of radio-controlled time signal immediately, press
repeatedly until the antenna
Содержание SM55PRO
Страница 12: ......
